Tahir Arms Stores

• Real wood and metal, handcrafted by skilled karigars, Certified as non firing replicas. Display item for your houses, hotels, Resorts, Walls, etc.   Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as the snaplock and snaphaunce.
• The true flintlock continued to be in common use for over two centuries, replaced by percussion cap and, later, the cartridge-based systems in the early-to-mid 19th century. Although long superseded by modern firearms, flintlock weapons enjoy continuing popularity with black-powder shooting enthusiasts.

• A typical flintlock mechanism has a piece of flint which is held in place in between a set of jaws on the end of a short hammer (sometimes called the "cock" due to its shape resembling a rooster's beak). Before shooting, the hammer is pulled back into a spring-tensioned (or "cocked") position. Pulling the trigger disengages the sear and releases the hammer, which swings forward causing the flint to strike a piece of steel called the "frizzen". At the same time, the motion of the flint and hammer pushes the frizzen back, opening the cover to a concealed flash pan, which contains a small charge of gunpowder. As the flint strikes the frizzen it creates sparks. The flint is harder than steel so it shaves off the frizzen a shower tiny steel fragments. Due to their minute size, these fragments have an extremely large surface-area to volume ratio. A high proportion of the fragments' iron is in contact with air and it rapidly oxidises, making them extremely hot.[4] Hot fragments that fall into the powder in the pan will ignite it. Flame from this burning powder travels through a small touch hole into the gun barrel; the main propellant charge is ignited, causing the weapon to fire the projectile.

• Real Replica of Muzzle loading guns used in 17th Century

Key USP

"Real wood and metal, handcrafted by skilled karigars, Certified as non firing replicas. Display item for your houses, hotels, Resorts, Walls, etc.   Flintlock is a general term for any firearm that uses a flint-striking ignition mechanism, the first of which appeared in Western Europe in the early 16th century. The term may also apply to a particular form of the mechanism itself, also known as the true flintlock, that was introduced in the early 17th century, and gradually replaced earlier firearm-ignition technologies, such as the matchlock, the wheellock, and the earlier flintlock mechanisms such as the snaplock and snaphaunce.

The true flintlock continued to be in common use for over two centuries, replaced by percussion cap and, later, the cartridge-based systems in the early-to-mid 19th century. Although long superseded by modern firearms, flintlock weapons enjoy continuing popularity with black-powder shooting enthusiasts."

Technical Specification:

A typical flintlock mechanism has a piece of flint which is held in place in between a set of jaws on the end of a short hammer (sometimes called the "cock" due to its shape resembling a rooster's beak). Before shooting, the hammer is pulled back into a spring-tensioned (or "cocked") position. Pulling the trigger disengages the sear and releases the hammer, which swings forward causing the flint to strike a piece of steel called the "frizzen". At the same time, the motion of the flint and hammer pushes the frizzen back, opening the cover to a concealed flash pan, which contains a small charge of gunpowder. As the flint strikes the frizzen it creates sparks. The flint is harder than steel so it shaves off the frizzen a shower tiny steel fragments. Due to their minute size, these fragments have an extremely large surface-area to volume ratio. A high proportion of the fragments' iron is in contact with air and it rapidly oxidises, making them extremely hot.

Hot fragments that fall into the powder in the pan will ignite it. Flame from this burning powder travels through a small touch hole into the gun barrel; the main propellant charge is ignited, causing the weapon to fire the projectile.

Type:

Real Replica of Muzzle loading guns used in 17th Century. Camel Bone work on body by skilled karigars offers a unmatched look of history

• Blowback Action: Provides realistic recoil, enhancing the shooting experience.

• Picatinny Rails: Full-length top rail and lower rail for mounting optics, lasers, or tactical lights.

• Adjustable Bipod: Included folding bipod for added stability during shooting.

• Ergonomic Grip: Pistol-style grip for comfortable handling.

• Caliber: .177 (4.5mm) pellet

• Power Source: 12g CO₂ cartridge

• Velocity: Up to 430 fps (2.1 ft-lbs muzzle energy)

• Action: Double/Single Action

• Capacity: 6-shot rotary magazine (realistic-looking cartridge shells)

• Material: Full metal construction with a distressed "Battlefield" finish

Tryo Combo benchrest is a cross between Robust and Easy shot Being detachable and adjustable the rest can serve as a front shooting rest as well

• Complete balve unit wirh seal ASG CZP09

• Tools Required: A flathead screwdriver or fine-tipped needle-nose pliers may be necessary for installation.

• Lubrication: Apply silicone oil to the O-rings during installation to ensure proper sealing and prevent wear.

• Depth Alignment: Ensure the new valve is seated to the same depth as the original to prevent CO₂ leakage.

• Design: Specifically engineered to fit the fore-end of the PX100 series rifles.

• Material: Typically constructed from durable materials like aluminum or high-strength polymer to withstand the rigors of shooting.

• Mounting: Secures a bipod to the rifle, providing a stable shooting platform.

• Compatibility: Compatible with various bipod models that fit the clamp's specifications.

• Non-functional replica used for training, display, or theatrical purposes.

• Mimics the size, weight, and appearance of real firearms without firing capability.

• Ideal for firearm handling practice, safety drills, and exhibitions.

• Made from durable materials like metal, plastic, or wood for realistic feel.

• Caliber: 0.177" (4.5mm)

• Max Velocity: 243 m/s (800 fps)

• Power: Up to 16 Joules (12 ft-lb)

• Power Source: PCP (Pre-Charged Pneumatic)

• Action Mechanism: Side Lever

• Barrel Length: 270mm

• Total Length: 495mm with integrated suppressor

Length 300mn width 140mm weight 800 grams  smooth trigger  all metal body and sight

• A holster made from genuine leather designed to securely hold and carry a firearm.

• Popular for their durability, comfort, classic look, and ability to mold to your gun over time.

• Used for concealed carry, duty use, or range shooting.

• Boack nylon cover padded gor pp100 harpy pcp precihole air pistol

• Material & Protection: Crafted from durable black nylon with internal padding, offering reliable protection against dust, scratches, and minor impacts.

• Design & Fit: Tailored to snugly fit the PP100 model, ensuring a secure and form-fitting cover.

• Closure Mechanism: Equipped with a secure zipper closure, allowing for easy access while keeping the contents safe.